2013 New 12V 35W H7, H4-1, H1/xenon hid xenon conversion kit use slim ballast
Specifications:
|
Power
|
35W
|
|
Input Voltage
|
9V-16V
|
|
Luminous Flux
|
2200lm-3300lm
|
|
Color temperature
|
5000K,6000K
|
|
Life time
|
More than 3000 hours
|
|
Working temperature
|
-40 °C~ +105°C
|
|
Standard input current
|
3.2A
|
12V35W Slim HID Kit Basic Fittings:
*2 x Xenon HID Bulbs
*2 x Ballasts ( with built-in starter/igniter for better performance)
*2 x secure Mounting Brackets
*Illustrated Installation Instructions
*All necessary install accessories
12V35W Slim HID Kit Adavantage:
1. Up to three times less wattage is used (HID = 35w)
Up to four times more bright light produced (HID = 2400-3200lu)
Up to ten times more intense light produced (HID = 202,500cd)
Up to six times longer lifespan (HID = 2500hr)
2. Greater Visibility and Road Safety
3. Waterproof, circuit protection
4. Easy installation
Strict-Testing for HID KIT:
1) HID KIT Open circuit protection test
2) HID KIT Short circuit protection test
3) HID KIT Short voltage protection test
4) HID KIT Over voltage protection test
5) HID KIT Flash impact test: no flashing during steady status
6) HID KIT Shockproof,waterproof and dustproof test
7) HID KIT Anti-interference test
8) HID KIT High/low Temperature test
9) HID KiT Aging test
12V35W Slim HID Kit Instruction:
1,Please wait for the entire cool-down of the car lighting and engine for the sake of safety in installation.
2,Before the installation,please confirm that the gear is at ‘N’ or ‘P’.Please Ensure that the switch is off in installation.
3,Be carfull to avoid scald,especially in turning on/off the car lighting.Be careful to avoid beating and cutting bulbs,not to touch bulbs with fingers,which will bring blot.
4,Be careful to examine the connection of the contactor,ports and voltaic wire.False connection will bring on lighting problems.
5,Please let the end of bulb not touch the interior light shield of the headlight assembly when adjusting the bulb.
6,In putting through the power supply of a step-up transformer,do not connect the wrong electrode.
If you choose canbus HID KIT:
This product is recommended for newer vehicle.
| 1.It can solve bulb flickering.
2.Is very popular and very easy to install.
3.Water proof .High voltage resistant.
1.Solve the HID warning problem HID Warning Canceller
HID kit problem eliminator plugs.
2.Get rid of the strobe light effect in vehicles withaftermarket hid kits.
3.Eliminates annoying bulb out dashboard indicator light. If your vehicles new hid kit
flashes like a strobe light when you start your vehicle, then this is for you! If your
vehicle a bulb out indicator light on after installing your hid kit then this is for you.
4.Our new problem iminator plug smooths out the voltage and provides constant power
to the hid conversion kit elimating the flickering lights.
5.These plugs will also provide the correctresistance to fool the vehicles computer into
thinking there ared headlight bulbs in use. This will turn off the annoying dash board
bulb out indicator light.
|
Be info that AC is better than the DC.
See the different as below for AC and DC.
AC digital ballast inside for your review
DC ballast inside for your review:
AC is the abbreviation of alternating current
DC is the abbreviation of direct current
Buy with confidence
WARRANTY 12 MONTHS AFTER PURCHASE !!!
